Solar Panels in Mill Park, VIC — Costs, Rebates & Quotes
Mill Park is an established northern suburb of family homes, built out through the 1980s and 90s around its lakes and parklands. Mostly freestanding houses on standard blocks make it straightforward solar territory, where the rebate and self-consumption drive the return.
This page covers solar for Mill Park: the AusNet network rules, what a system generates, the Victorian rebates, and the savings maths — checked against the issuing authorities and dated below.
- Servicing North Melbourne
- Postcode 3082
- Accredited installers
Solar Panels cost in Mill Park
Typically $4,000–$12,000 installed before rebates.
See the full solar panels price guide →Who connects your solar in Mill Park: AusNet Services
Mill Park is on the AusNet Services network across Melbourne's outer north and north-east. All five Victorian distributors share the same export rules.
- AusNet applies the Victoria-wide 5 kW per phase export limit. Single-phase homes can install up to a 10 kW inverter (5 kW export); three-phase homes can export up to 15 kW.
- You can fit more panels than inverter capacity to lift output.
- AusNet runs a large northern and eastern network; on some blocks site-specific checks apply.
- Standard suburban roofs make a typical system easy to lay out here.
How much solar generates in Mill Park
Mill Park is in STC Zone 4 (rating 1.185), so it earns fewer federal STCs than NSW. A well-installed, north-facing 6.6 kW system generates around 8,600–9,100 kWh a year.
Homes from the 1980s–90s generally have workable roofs; some may have older switchboards to upgrade.
What a 6.6 kW system actually saves here
Self-consumption is decisive in Victoria: the minimum feed-in tariff is just 0.04c/kWh flat for 2025–26, while you pay roughly 28–32c/kWh to buy power back. Use your own solar during the day rather than exporting it for a few cents.
Run the dishwasher, washing machine and a hot-water heat pump in the middle of the day, or add a battery for the evening peak.
| Solar generated | ~8,800 kWh/yr |
|---|---|
| Used at home (~33%) | 2,904 kWh × 30c = ~$871 saved |
| Exported (~67%) | 5,896 kWh × 4c = ~$236 earned |
| Indicative annual benefit | ~$1,107 |
Getting it right in Mill Park
- Apply for the Solar Victoria rebate before installing — approval must come first, via an authorised retailer.
- On a 1980s–90s home, allow for a possible switchboard or meter upgrade.
- Get the roof layout assessed; a split array can beat squeezing everything onto one face.
- With near-zero feed-in, design for self-consumption and consider a battery.
Rebates for Mill Park homes
Unlike NSW, Victoria has a state solar rebate. The Solar Homes program offers eligible owner-occupiers up to $1,400 off a solar PV system (plus an optional interest-free loan of up to $1,400), on top of the federal STC discount. An income test applies (under $210,000, reducing to $150,000 from 1 July 2026), the property must be worth under $3 million, with no previous solar rebate at the address.
Victoria is STC Zone 4, so the federal discount is a little smaller than in NSW, and the feed-in tariff is even lower. For batteries, the federal Cheaper Home Batteries Program (~30% off) applies.
up to $1,400 rebate (plus an optional interest-free loan of up to $1,400)
Solar Homes Program — Solar PV rebate
Solar Victoria
~$2,300–$2,400 off a 6.6kW system (more for larger systems; declines each year to 2030, with the deeming period stepping down on 1 January)
Federal STCs (Small-scale Technology Certificates)
Clean Energy Regulator
small and retailer-set — the 2025–26 Victorian minimum is just 0.04c/kWh flat (time-varying plans pay up to ~6.57c/kWh at the evening peak, ~0c during the day)
Solar feed-in tariff
Essential Services Commission / your electricity retailer
Figures last checked 2026-06-17.
Full Victorian solar panels rebate guide →Mill Park solar panels questions
Is solar worth it in Mill Park?
Yes for most homes. Mill Park's freestanding family homes have workable roofs, and a 6.6 kW system makes around 8,600–9,100 kWh a year. Eligible owner-occupiers take up to $1,400 off via Solar Victoria on top of the federal discount. Allow for a possible switchboard upgrade on an older home. Victoria's feed-in tariff is near zero, so the value is in using your own power during the day, helped by a battery for the evening.
How much do solar panels cost in Victoria?
A quality 6.6kW system typically costs $4,000–$6,500 after the federal STC discount, with larger 10–13kW systems running higher. The Solar Homes Program rebate can reduce the price further for eligible households.
Is solar worth it in Victoria?
For most homes, yes. A 6.6kW system commonly saves $1,000–$1,600 a year and pays for itself in three to five years, then keeps saving for the 25-year life of the panels.
What size solar system do I need?
It depends on your usage and roof. 6.6kW suits many homes; go larger (10kW or more) if you're all-electric, plan to add a battery or EV, or use a lot of power during the day.
Sources & last checked
Figures on this page were checked against the issuing authorities and industry sources below on 2026-06-17. Rebates, tariffs and network rules change — confirm current values before you buy.
- AusNet Services — about our networks (northern Melbourne)
- Solar Choice — solar system size limits by network (Victoria 5 kW per phase)
- Solar Victoria — Solar panel (PV) rebate (up to $1,400)
- Essential Services Commission — Victorian minimum feed-in tariff 2025–26
- Clean Energy Regulator — Small-scale Technology Certificates
- STC Zone 4 rating for Victoria (1.185)
Solar Panels near Mill Park
Compare solar panels quotes in Mill Park
Free, no obligation, and rebates could save you thousands.